Hornby 2019 Release Information - Steam Locomotives

Hornby PO, Tytherington Stone Co, Peckett W4 Class, 0-4-0ST, 'Daphne' - Era 2

Product Code: R3702

Production Details:

Hornby PO, Tytherington Stone Co, Peckett W4 Class, 0-4-0ST, 'Daphne' - Era 2. Gauge: 00, Length: 84mm, DCC Type: DCC Ready, Entered Service: 1950s, Wheel Configuration: 0-4-0ST. Minimum Curve: Hornby 1st radius + / 371mm+.

Hornby S&KLR, Peckett W4 Class (Open Back Cab), 0-4-0ST, 'Bear' - Era 7/8

Product Code: R3703

Production Details:

Hornby S&KLR, Peckett W4 Class (Open Back Cab), 0-4-0ST, 'Bear' - Era 7/8. Gauge: 00, Length: 84mm, DCC Type: DCC Ready, Entered Service: 1950s, Wheel Configuration: 0-4-0ST. Minimum Curve: Hornby 1st radius + / 371mm+.

Hornby PO, Earl of Dudley's Round Oak Works, Peckett W4 Class (Open Back Cab), 0-4-0ST, 'Lady Edith' - Era 2

Product Code: R3761

Production Details:

Hornby PO, Earl of Dudley's Round Oak Works, Peckett W4 Class (Open Back Cab), 0-4-0ST, 'Lady Edith' - Era 2. Gauge: 00, Length: 84mm, DCC Type: DCC Ready, Entered Service: 1950s, Wheel Configuration: 0-4-0ST. Minimum Curve: Hornby 1st radius + / 371mm+.

Hornby Sherwood Colliery Co. Ltd, Peckett B2 Class, 0-6-0ST, No.4 'Sherwood' - Era 3

Product Code: R3693

Production Details:

Hornby Sherwood Colliery Co. Ltd, Peckett B2 Class, 0-6-0ST, No.4 'Sherwood' - Era 3. Length: 97mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: Sherwood Colliery Co. Ltd, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1927, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST. Peckett 1678 was built in 1927 for the Sherwood Colliery Co. Ltd, becoming Locomotive No. 4. In 1947, when the coal mines were nationalised, Sherwood Colliery became part of the East Midlands Division, Area No. 2 and 1678 was transferred into NCB ownership. In 1960, 1678 was registered with the Railway Executive for mainline use if required and continued in use at the colliery through to August 1969, when it was withdrawn from service.

Hornby Sherwood Colliery Co. Ltd, Peckett B2 Class, 0-6-0ST, No.4 'Sherwood' - Era 3

Product Code: R3693X

Production Details:

Hornby Sherwood Colliery Co. Ltd, Peckett B2 Class, 0-6-0ST, No.4 'Sherwood' - Era 3. Length: 97mm, DCC Type: DCC Fitted, Period: Era 3 (1923 - 1947), Operator/Livery: Sherwood Colliery Co. Ltd, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1927, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST. Peckett 1678 was built in 1927 for the Sherwood Colliery Co. Ltd, becoming Locomotive No. 4. In 1947, when the coal mines were nationalised, Sherwood Colliery became part of the East Midlands Division, Area No. 2 and 1678 was transferred into NCB ownership. In 1960, 1678 was registered with the Railway Executive for mainline use if required and continued in use at the colliery through to August 1969, when it was withdrawn from service.

Hornby Associated Portland Cement, Peckett B2 Class, 0-6-0ST, 'Westminster' - Era 6

Product Code: R3694

Production Details:

Hornby Associated Portland Cement, Peckett B2 Class, 0-6-0ST, 'Westminster' - Era 6. Length: 97mm, DCC Type: DCC Ready, Period: Era 6 (1957 - 1971), Operator/Livery: Associated Portland Cement, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1914, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST . Peckett 1378 was built in 1914 for the War Department, being sent to the Larkhill Military Railway, before entering service on the War Department’s Fovant Military Railway in 1915, being named as Westminster, where it stayed until December 1920. Sold on to Associated Portland Cement (APC) at Houghton Regis, the locomotive also worked at Shipton-on-Cherwell and Kidlington Works, before being sold into private ownership.

Hornby Associated Portland Cement, Peckett B2 Class, 0-6-0ST, 'Westminster' - Era 6

Product Code: R3694X

Production Details:

Hornby Associated Portland Cement, Peckett B2 Class, 0-6-0ST, 'Westminster' - Era 6. Length: 97mm, DCC Type: DCC Fitted, Period: Era 6 (1957 - 1971), Operator/Livery: Associated Portland Cement, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1914, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST . Peckett 1378 was built in 1914 for the War Department, being sent to the Larkhill Military Railway, before entering service on the War Department’s Fovant Military Railway in 1915, being named as Westminster, where it stayed until December 1920. Sold on to Associated Portland Cement (APC) at Houghton Regis, the locomotive also worked at Shipton-on-Cherwell and Kidlington Works, before being sold into private ownership.

Hornby National Coal Board, Peckett B2 Class, 0-6-0ST, 1455 - Era 3

Product Code: R3695

Production Details:

Hornby National Coal Board, Peckett B2 Class, 0-6-0ST, 1455 - Era 3. Length: 97mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: National Coal Board, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1918, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST. Peckett 1455 was built in 1918 for the Ryhope Coal Co. Ltd, being used across the extensive railway system. In 1947, when the coal mines were nationalised, Ryhope Colliery became part of the Northern Division, Area No. 1 and 1455 was transferred into NCB ownership, remaining there until the colliery closed in December 1966.

Hornby National Coal Board, Peckett B2 Class, 0-6-0ST, 1455 - Era 3

Product Code: R3695X

Production Details:

Hornby National Coal Board, Peckett B2 Class, 0-6-0ST, 1455 - Era 3. Length: 97mm, DCC Type: DCC Fitted, Period: Era 3 (1923 - 1947), Operator/Livery: National Coal Board, Class: Peckett B2 Class, Designer: Peckett, Entered Service: 1918, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0ST. Peckett 1455 was built in 1918 for the Ryhope Coal Co. Ltd, being used across the extensive railway system. In 1947, when the coal mines were nationalised, Ryhope Colliery became part of the Northern Division, Area No. 1 and 1455 was transferred into NCB ownership, remaining there until the colliery closed in December 1966.

Hornby BR, A3 Class, 4-6-2, 60103 'Flying Scotsman’ - Era 4

Product Code: R3627

Production Details:

Hornby BR, A3 Class, 4-6-2, 60103 'Flying Scotsman’ - Era 4. Technical Specification & Detail: - Length: 293mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Experimental Blue, Class: A3 Class, Designer: Sir Nigel Gresley, Entered Service: 1923, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2

Hornby LNER, A1 Class, 4-6-2, 4472 'Flying Scotsman’ - Era 3

Product Code: R3736

Production Details:

Hornby LNER, A1 Class, 4-6-2, 4472 'Flying Scotsman’ - Era 3. Technical Specification & Detail: Length: 293mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: LNER, Apple Green, Class: A1 Class, Designer: Sir Nigel Gresley, Entered Service: 1923, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby Alan Pegler LNER, A3 Class, 4-6-2, 4472 ‘Flying Scotsman’ - Era 6

Product Code: R3738

Production Details:

Hornby Alan Pegler LNER, A3 Class, 4-6-2, 4472 ‘Flying Scotsman’ - Era 6. Technical Specification & Detail: - Length: 293mm, DCC Type: DCC Ready, Period: Era 6 (1957 - 1971), Operator/Livery: Alan Pegler LNER, Apple Green, Limited Edition: Yes, Limited Edition Size: 1,000, Class: A3 Class, Designer: Sir Nigel Gresley, Entered Service: 1923, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, A4 Class, 4-6-2, 60028 ‘Walter K Whigham’ - Era 4

Product Code: R3701

Production Details:

Hornby BR, A4 Class, 4-6-2, 60028 ‘Walter K Whigham’ - Era 4. Technical Specification & Detail: - Length: 291mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Transitional BR, Experimental Blue, Class: A4 Class, Designer: Sir Nigel Gresley, Entered Service: 1937, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, A4 Class, 4-6-2, 60022 'Mallard' - Era 4

Product Code: R3737

Production Details:

Hornby BR, A4 Class, 4-6-2, 60022 'Mallard' - Era 4. Technical Specification & Detail: - Length: 291mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Experimental Blue, Class: A4 Class, Designer: Sir Nigel Gresley, Entered Service: 1938, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby LNER, A4 Class, 4-6-2, 4464 'Bittern' - Era 11

Product Code: R3771

Production Details:

Hornby LNER, A4 Class, 4-6-2, 4464 'Bittern' - Era 11. Technical Specification & Detail: - Length: 291mm, DCC Type: DCC Ready, Period: Era 11 (2014 +), Operator/Livery: LNER Garter Blue, Limited Edition: Yes, Limited Edition Size: 1,000, Class: A4 Class, Designer: Sir Nigel Gresley, Entered Service: 1937, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby LMS, Princess Royal, 4-6-2, 6201 'Princess Elizabeth' - Era 3

Product Code: R3709 / R3709X

Production Details:

Hornby LMS, Princess Royal, 4-6-2, 6201 'Princess Elizabeth' - Era 3. Technical Specification & Detail: - Length: 300mm, Period: Era 3 (1923 - 1947), Operator/Livery: LMS (Crimson Lake), Class: Princess Royal, Designer: Sir William Stanier, Entered Service: 1933, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Princess Royal, 4-6-2, 46206 'Princess Marie Louise' - Era 4

Product Code: R3711 / R3711X

Production Details:

Hornby BR, Princess Royal, 4-6-2, 46206 'Princess Marie Louise' - Era 4. Technical Specification & Detail: Length: 300mm, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Experimental Blue, Class: Princess Royal, Designer: Sir William Stanier, Entered Service: 1935, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Princess Royal, 4-6-2, 46207 'Princess Arthur of Connaught' - Era 5

Product Code: R3713 / R3713X

Production Details:

Hornby BR, Princess Royal, 4-6-2, 46207 'Princess Arthur of Connaught' - Era 5. Technical Specification & Detail: - Length: 300mm, Period: Era 5 (1956 - 1968), Operator/Livery: Late BR, BR Crimson, Class: Princess Royal, Designer: Sir William Stanier, Entered Service: 1935, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby LMS, Princess Coronation Class, 4-6-2, 6224 ‘Princess Alexandra’ - Era 3

Product Code: R3715

Production Details:

Hornby LMS, Princess Coronation Class, 4-6-2, 6224 ‘Princess Alexandra’ - Era 3. Technical Specification & Detail: Length: 301mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: LMS Caledonian Blue, Class: Princess Coronation Class, Designer: Sir William Stanier, Entered Service: 1937, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2

Hornby BR, Princess Coronation Class, 4-6-2, 46232 'Duchess of Montrose' - Era 4

Product Code: R3642

Production Details:

Hornby BR, Princess Coronation Class, 4-6-2, 46232 'Duchess of Montrose' - Era 4. Technical Specification & Detail: - Length: 301mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Green, Class: Princess Coronation Class, Designer: Sir William Stanier, Entered Service: 1938, Minimum Curve: R2, Age Suitability: 14+, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Standard 7 'Britannia' Class, 4-6-2, 70046 'ANZAC - Era 5

Product Code: R3643

Production Details:

Hornby BR, Standard 7 'Britannia' Class, 4-6-2, 70046 'ANZAC - Era 5. 70046 ANZAC entered traffic on 22 June, 1954, being allocated to 6J Holyhead for the first five years of service. With further allocations to Holyhead coming in December 1962 and June 1965, 70046 spent over half of it service life operating from this shed. The final allocation was to 12A Carlisle Kingsmoor on 8 January, 1966 and it was from here that 70046 was withdrawn on 8 July, 1967, having completed just thirteen years and sixteen days in service. Technical Specification & Detail: - Length: 287mm, DCC Type: DCC Ready, Period: Era 5 (1956 - 1968), Operator/Livery: Late BR Green, Class: Britannia' Class, Designer: Robert Riddles, Entered Service: 1954, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Merchant Navy Class, 4-6-2, 35029 ‘Ellerman Lines’ - Era 4

Product Code: R3649

Production Details:

Hornby BR, Merchant Navy Class, 4-6-2, 35029 ‘Ellerman Lines’ - Era 4. Technical Specification & Detail: - Length: 285mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Green, Class: Merchant Navy Class, Designer: OVS Bulleid, Entered Service: 1949, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Merchant Navy Class, 4-6-2, 35022 'Holland America Line' - Era 4

Product Code: R3716

Production Details:

Hornby BR, Merchant Navy Class, 4-6-2, 35022 'Holland America Line' - Era 4. Technical Specification & Detail: - Length: 285mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Green, Class: Merchant Navy Class, Designer: OVS Bulleid, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby SR, Merchant Navy Class, 4-6-2, 21C7 'Aberdeen Commonwealth' - Era 3

Product Code: R3717

Production Details:

Hornby SR, Merchant Navy Class, 4-6-2, 21C7 'Aberdeen Commonwealth' - Era 3. Technical Specification & Detail: - Length: 285mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: SR, Wartime Black, Class: Merchant Navy Class, Designer: OVS Bulleid, Entered Service: 1942, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-2.

Hornby BR, Class 5MT, 4-6-0, 45379 - Era 11

Product Code: R3805

Production Details:

Hornby BR, Class 5MT, 4-6-0, 45379 - Era 11. Technical Specification & Detail: - Length: 256mm, DCC Type: DCC Ready, Period: Era 11 (2014 +), Operator/Livery: Late BR Black, Limited Edition: Yes, Limited Edition Size: 1,000, Class: Class 5MT, Designer: Sir William Stanier, Entered Service: 1937, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-0.

Hornby LNER, J36 Class, 0-6-0, 65235 'Gough' - Era 4

Product Code: R3734

Production Details:

Hornby LNER, J36 Class, 0-6-0, 65235 'Gough' - Era 4. Technical Specification & Detail: - DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Transitional BR, BR Black, Class: J36 Class, Designer: Matthew Holmes, Entered Service: 1891, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 0-6-0.

Hornby ROD, J36 Class, 0-6-0, 5662 - Era 2

Product Code: R3735

Production Details:

Hornby ROD, J36 Class, 0-6-0, 5662 - Era 2. Technical Specification & Detail: Length: 200mm, DCC Type: DCC Ready, Period: Era 2 (1870 - 1922), Operator/Livery: ROD, Olive Drab, Class: J36 Class, Designer: Matthew Holmes, Entered Service: 1891, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 0-6-0.

Hornby LNER, Class O1, 2-8-0, 6359 - Era 3

Product Code: R3729

Production Details:

Hornby LNER, Class O1, 2-8-0, 6359 - Era 3. Technical Specification & Detail: - Length: 230mm, DCC Type: DCC Ready, Period: Era 3 (1923 - 1947), Operator/Livery: LNER, Wartime Black, Class: Class O1, Designer: Edward Thompson, Entered Service: 1945, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-8-0.

Hornby BR, Class O1, 2-8-0, 63806 - Era 4

Product Code: R3730

Production Details:

Hornby BR, Class O1, 2-8-0, 63806 - Era 4. Technical Specification & Detail: - Length: 230mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Black, Class: Class O1, Designer: Edward Thompson, Entered Service: 1945, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-8-0.

Hornby BR, H Class, 0-4-4T, 31177 - Era 4

Product Code: R3731

Production Details:

Hornby BR, H Class, 0-4-4T, 31177 - Era 4. Technical Specification & Detail: Length: 132mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Lined BR Black, Class: H Class, Designer: Harry Wainwright, Entered Service: 1909, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 0-4-4T.

Hornby BR (Early), Lord Nelson Class, 4-6-0, 30852 'Sir Walter Raleigh' - Era 5

Product Code: R3732

Production Details:

Hornby BR (Early), Lord Nelson Class, 4-6-0, 30852 'Sir Walter Raleigh' - Era 5. Technical Specification & Detail: - Length: 283mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Green, Class: Lord Nelson Class, Designer: Richard Maunsell, Entered Service: 1928, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-0.

Hornby BR (Late), Lord Nelson Class, 4-6-0, 30859 'Robert Blake' - Era 4

Product Code: R3733

Production Details:

Hornby BR (Late), Lord Nelson Class, 4-6-0, 30859 'Robert Blake' - Era 4. Technical Specification & Detail: - Length: 283mm, DCC Type: DCC Ready, Period: Era 5 (1956 - 1968), Operator/Livery: Late BR Green, Class: Lord Nelson Class, Designer: Richard Maunsell, Entered Service: 1929, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 4-6-0.

Hornby GWR, Class 5101 'Large Prairie', 2-6-2T, 4154 - Era 3

Product Code: R3719 / R3719X

Production Details:

Hornby GWR, Class 5101 'Large Prairie', 2-6-2T, 4154 - Era 3. Technical Specification & Detail: - Length: 165mm, DCC Type: DCC Ready and Fitted option available, Period: Era 3 (1923 - 1947), Operator/Livery: GWR, Class: Class 5101, Designer, Charles Collett, Entered Service, 1947, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-6-2T.

Hornby GWR, Class 61xx 'Large Prairie', 2-6-2T, 6110 - Era 3

Product Code: R3721 / R3721X

Production Details:

Hornby GWR, Class 61xx 'Large Prairie', 2-6-2T, 6110 - Era 3. Technical Specification & Detail: - Length: 165mm, DCC Type: DCC Ready and Fitted option available, Period: Era 3 (1923 - 1947), Operator/Livery: GWR, Class: Class 61xx, Designer: Charles Collett, Entered Service: 1931, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-6-2T.

Hornby BR, Class 61xx 'Large Prairie', 2-6-2T, 6145 - Era 4

Product Code: R3723 / R3723X

Production Details:

Hornby BR, Class 61xx 'Large Prairie', 2-6-2T, 6145 - Era 4. Technical Specification & Detail: - Length: 165mm, DCC Type: c, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Class: Class 61xx, Designer: Charles Collett, Entered Service: 1932, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-6-2T.

Hornby BR, Class 5101 'Large Prairie', 2-6-2T, 4160 - Era 5

Product Code: R3725 / R3725X

Production Details:

Hornby BR, Class 5101 'Large Prairie', 2-6-2T, 4160 - Era 5. Technical Specification & Detail: - Length: 165mm, DCC Type: DCC Ready and Fitted option available, Period: Era 5 (1956 - 1968), Operator/Livery: Late BR, Class: Class 5101, Designer: Charles Collett, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-6-2T.

Hornby BR, 'Terrier', 0-6-0T, 32655 - Era 4

Product Code: R3767 / R3767X

Production Details:

Hornby BR, 'Terrier', 0-6-0T, 32655 - Era 4. Technical Specification & Detail: - Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR, Lined Black, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby BR, 'Terrier', 0-6-0T, 32636 - Era 5

Product Code: R3768 / R3768X

Production Details:

Hornby BR, 'Terrier', 0-6-0T, 32636 - Era 5. Technical Specification & Detail: Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period: Era 4 (1948 - 1956), Operator/Livery: Late BR, Lined Black, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby LB&SCR, 'Terrier', 0-6-0T, 655 'Stepney' - Era 2

Product Code: R3780 / R3780X

Production Details:

Hornby LB&SCR, 'Terrier', 0-6-0T, 655 'Stepney' - Era 2. Technical Specification & Detail: - Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period: Era 2 (1870 - 1922), Operator/Livery: LB&SCR, Raw Umber, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby K&ESR, 'Terrier', 0-6-0T, No. 5 'Rolvenden' - Era 2

Product Code: R3781 / R3781X

Production Details:

Hornby K&ESR, 'Terrier', 0-6-0T, No. 5 'Rolvenden' - Era 2. Technical Specification & Detail: - Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period: Era 2 (1870 - 1922), Operator/Livery: K&ESR, Blue, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby SE&CR, 'Terrier', 0-6-0T, 751 - Era 2

Product Code: R3782 / R3782X

Production Details:

Hornby SE&CR, 'Terrier', 0-6-0T, 751 - Era 2. Technical Specification & Detail: - Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period: Era 2 (1870 - 1922), Operator/Livery: SECR Lined Green, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby SR, 'Terrier', 0-6-0T, 2662 - Era 3

Product Code: R3783 / R3783X

Production Details:

Hornby SR, 'Terrier', 0-6-0T, 2662 - Era 3. Technical Specification & Detail: - Length: 105mm, DCC Type: DCC Ready and Fitted option available, Period Era 3 (1923 - 1947), Operator/Livery: SR Olive Green, Class: Terrier, Designer: William Stroudley, Entered Service: 1890, Minimum Curve: R1, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby - LB&SCR, Terrier, 0-6-0T, 48 ‘Leadenhall’, Era 2

Product Code: R3811 / R3811X

Production Details:

Hornby LB&SCR, Terrier, 0-6-0T, 48 ‘Leadenhall’, Era 2. Technical Specification & Detail: Gauge: 00, Finish: Standard, Length: 105 mm, DCC Type: DCC Ready and DCC Fitted available, Period: Era 2 (1870 - 1922), Operator/Livery: LB&SCR Improved Engine Green, Class: A1, Designer: Stroudley, Entered Service: 1876, Minimum Curve: 1st Radius + (371mm), Age Suitability: 14+, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby - SR, Terrier, 0-6-0T, W10 ‘Cowes’, Era 3

Product Code: R3812 / R3812X

Production Details:

Hornby SR, Terrier, 0-6-0T, W10 ‘Cowes’, Era 3. Technical Specification & Detail: - Gauge: 00, Finish: Standard, Length: 105 mm, DCC Type: DCC Ready and DCC Fitted available, Period: Era 3 (1923 - 1947), Operator/Livery: SR Maunsell Green, Class: A1X, Designer: Stroudley, Entered Service: 1874, Minimum Curve: 1st Radius + (371mm), Age Suitability: 14+, Motor: 3 Pole Skew Wound, Wheel Configuration: 0-6-0T. Please note: This model uses the 2 Function Locomotive Decoder (with NEM 651, 6 Pin Plug).

Hornby LMS, Class 21 'Pug', 0-4-0ST, 11244 - Era 3

Product Code: R3727

Production Details:

Hornby LMS, Class 21 'Pug', 0-4-0ST, 11244 - Era 3. Technical Specification & Detail: - Length: 85mm, Period: Era 3 (1923 - 1947), Operator/Livery: LMS, Black, Class: Class 21 'Pug', Designer: Sir John Aspinall, Entered Service: 1910, Minimum Curve: R1, Motor: Type 7, Wheel Configuration: 0-4-0ST.

Hornby BR, Class 21 'Pug', 0-4-0ST, 51207 - Era 4

Product Code: R3728

Production Details:

Hornby BR, Class 21 'Pug', 0-4-0ST, 51207 - Era 4. Technical Specification & Detail: - Length: 85mm, Period: Era 3 (1923 - 1947), Operator/Livery: Early BR Black, Class: Class 21 'Pug', Designer: Sir John Aspinall, Entered Service: 1893, Minimum Curve: R1, Motor: Type 7, Wheel Configuration: 0-4-0ST.

Hornby Railroad GWR, Class 3031 'Dean Single', 4-2-2, 'Achilles' - Era 2

Product Code: R3759

Production Details:

Hornby GWR, Class 3031 'Dean Single', 4-2-2, 'Achilles' - Era 2. Technical Specification & Detail: - Length: 232mm, DCC Type: DCC Ready, Period: Era 2 (1870 - 1922), Operator/Livery: GWR Green, Class: Class 3031 'Dean Single', Designer: William Dean, Entered Service: 1894, Minimum Curve: R2, Motor: 3 Pole with Flywheel.

Hornby Railroad BR (Heavily Weathered), Crosti Boiler 9F Class, 2-10-0, 92028 - Era 4

Product Code: R3756

Production Details:

Hornby BR (Heavily Weathered), Crosti Boiler 9F Class, 2-10-0, 92028 - Era 4. Technical Specification & Detail: - Length: 266mm, DCC Type: DCC Ready, Period: Era 4 (1948 - 1956), Operator/Livery: Early BR Black, Class: Crosti Boiler 9F Class, Designer: R.A Riddles, Entered Service: 1955, Minimum Curve: R2, Motor: 5 Pole Skew Wound, Wheel Configuration: 2-10-0.

Hornby Railroad LNER, Class J83, 0-6-0T, 8482 - Era 3

Product Code: R3668

Production Details:

Hornby LNER, Class J83, 0-6-0T, 8482 - Era 3. Technical Specification & Detail: - Length: 120mm, Period: Era 3 (1923 - 1947), Operator/Livery: LNER Apple Green, Class: Class J83, Designer: Matthew Holmes, Entered Service: 1924, Minimum Curve: R1, Age Suitability: 3+, Motor: Type 7, Wheel Configuration: 0-6-0T

Hornby Railroad S. Wilson Paper Mills, 0-4-T, No. 2112 - Era 2/3

Product Code: R3752

Production Details:

Hornby S. Wilson Paper Mills, 0-4-T, No. 2112 - Era 2/3.

Hornby Railroad Beggs Tooling, Class 264 'Pug', 0-4-0ST, 854 - Era 2/3

Product Code: R3753

Production Details:

Hornby Beggs Tooling, Class 264 'Pug', 0-4-0ST, 854 - Era 2/3.

Hornby Railroad Blundell King Timber Merchants, Type D, 0-4-0T, No. 7 - Era 3/4

Product Code: R3754

Production Details:

Hornby Blundell King Timber Merchants, Type D, 0-4-0T, No. 7 - Era 3/4.